You will do this as follows (using IDE-IP-address as the address in this example): Copy the following code into a new Automation scene on the Vera under the Luup tab. You can call the scene whatever you want, but for this example, we will use ZBSTest.

Examples are given for reading a device variable using luup.variable_get(…) and for initiating an action with luup.call_action(…). It is also possible to directly set device variables but, in many cases, this will have little or no apparent effect on the device.

In this example I’m going to restrict the Motion Detected event to Trigger our scene every day only from 20h to 07h. Click on the small Clock icon on the top right corner. You will do this as follows (using IDE-IP-address as the address in this example): Copy the following code into a new Automation scene on the Vera under the Luup tab. You can call the scene whatever you want, but for this example, we will use ZBSTest. MQTT Bridge for Luup.

Even Air Conditioning units. This guides shows how to use the iTach adaptors with the VERA Lite and VERA3 Z-Wave Controllers running UI5.. Using iTach with VERA. To enable VERA to use the iTach devices, we need to 2013-04-23 · 1 Adding Lua code to scenes and events; 2 Walk-through #1 -- At 12 noon, turn off the interior lights if the temperature is over 80 degrees; 3 Walk-through #2 -- Only run the scene during the daytime; 4 Samples.

1 Adding Lua code to scenes and events. 2 Walk-through #1 -- At 12 noon, turn off the interior lights if the temperature is over 80 degrees. 3 Walk-through #2 -- Only run the scene during the daytime. 4 Samples. 4.1 Lighting and Switch Actions. 4.1.1 Turn an appliance switch or a Danfoss thermostat on for device #5.

i have editted out quote and replaced . i can not get any examples of the os.execute()to work. here’s another script i have messed with to no avail. Following is a list of pages with sample code.

I use Z-Wave through a Vera Lite and the MiOS v1 binding, which means I I think I may have some examples of that too, but it may take a little longer to dig up . guts of the function) in the Lua code for the scene to set the OH ite

PFB.LOGLEVEL A table of constants for the various log levels. How to get PLEG condition value from LUUP code?

Google --> MIOS code repository Luup Somfy Walkthrough; Luup plugins and Luup code; Vera uses JSON as the native format, so any calls to Vera should request JSON in preference to XML. It's quicker. Communicating with your plugin.
Lediga ekonomijobb uppsala

luup.call_action ("urn:upnp-org:serviceId:Dimming1","SetLoadLevelTarget", { newLoadlevelTarget="99" },19) end. and it works if I manually tell it to GO. For example, looking at the code for the LUUP Weather plugin, we can see where the "serviceID" for Current Conditions is urn:micasaverde-com:serviceId:Weather1 (taken from the XML file): -- Store the current Condition (eg. "rain") luup.variable_set ( "urn:upnp-micasaverde-com:serviceId:Weather1" , "ConditionGroup" , condition, PARENT_DEVICE ) [code]local vcvar1 = luup.variable_get(“urn:upnp-org:serviceId:VContainer1”, “Variable1”, dID) luup.variable_set(“urn:upnp-org:serviceId:VContainer1”, “Variable1”,newvalue, dID) luup.variable_set(“urn:upnp-org:serviceId:VContainer1”, “Variable5”,“newtext”, dID)[/code] DayTime plugin Controlling a device example.

The hardware driver computer code just needs to emit the IR code it receives, whether that be a prontcode or otherwise.
Mi islita union city nj

Note that all messages are logged to Luup's LuaUPnP.log (using luup.log()) at Vera/Luup level 50 except warn and err levels (see below), which are logged at Vera log levels 2 and 1 respectively; all of which by default are enabled in /etc/cmh/cmh.conf. PFB.LOGLEVEL A table of constants for the various log levels.

Figure 1 - Finding your Node ID (3rd line, "32" in this example.) Figure 2 - Selecting a Trigger For Your Chime . Figure 3 - Adding a Luup code . Figure 4 - The Luup Code in Vera. In this example, chime "9" will play through node 32. Example: http://vera_ip_address:3480/data_request?id=user_data&output_format=xml. status.

It involves a very short piece of LUA code - but don't worry, all the information is here. Full Device ID List. In the VERA UI go to the APPS tab; Click the Develop Apps tab; Then click 'Test LUUP code (LUA)' in the left-hand menu; Copy the LUA code (below) and paste it into the Code window; Click the blue 'GO' button to make the code run

You will do this as follows (using IDE-IP-address as the address in this example): Copy the following code into a new Automation scene on the Vera under the Luup tab. You can call the scene whatever you want, but for this example, we will use ZBSTest. Hi all, I am looking for a way to integrate my aircon with my vera. I am pretty new at home automation, and very much so a vera/zwave novice. I’ve seen some posts around the place that use luup to send json payloads, but im not sure how to associate that payload with a switch, or where the luup code is meant to go Can anyone help??

In the following LUUP code, Device ID 12 is the CurrentTemperature ; R G B and W are respectively 18, 17, 19 and 20. I would like to know why my code doesn't work. Thank you so much for your help.